Quote:
Originally Posted by RoboMaster
Here's an annotated picture. Compare to the original to see what I am coloring over.
Red: reflection of top left tube, which is arrowed red
Blue: image of top right tube seen through the lexan
Purple: reflection of side "tab" (arrowed purple) and related screws (circled in reflection)
Green: reflection of curve
Yellow: unknown
At least, those are my thoughts. I'm having second guesses about the blue annotations, those reflections have a notch in them where there shouldn't be one. (The red has a notch/ledge if you don't know what I mean)
|
Thanks that clears it up a lot.
But I think the purple circles you have are more related to the "reflected red" than the purple. And I still don't get how it's reflecting. If the purple is vertical, it means the lexan is not bent. Yet it has to be bent for the reflected red to be angled.
Also, I think the "unknown yellow" is the real reflection of the top left tube, making it the red that's unkown.
See this post
http://www.chiefdelphi.com/forums/sh...9&postcount=77