Thread: UART Serial on cRIO
View Single Post
  #13   Spotlight this post!  
Unread 03-01-2010, 02:37
IceStorm IceStorm is offline
Mentor FRC 5046, FTC 8688
AKA: Chad
FRC #5046 (Jacked Up Jackets)
Team Role: Mentor
  
Join Date: Jan 2009
Rookie Year: 2009
Location: Michigan
Posts: 136
IceStorm is a glorious beacon of lightIceStorm is a glorious beacon of lightIceStorm is a glorious beacon of lightIceStorm is a glorious beacon of lightIceStorm is a glorious beacon of light
Send a message via AIM to IceStorm Send a message via Yahoo to IceStorm
Re: UART Serial on cRIO
Shoot...

I spent a bit more time looking at the board schematics somemore after i had already posted and it looks like they are actually using the I2C interface of the chip to talk to both the Triple Axis Accelerometer - ADXL345 and the Triple Axis Magnetometer - HMC5843 both of which are sold in breakout board form by sparkfun with I2C interfaces on the board. You might be able to just skip the board you referenced above and get the breakout boards for the individual components and just hook them up directly through I2C to the Crio.

Coming from a hobbyist not and EE and someone with a little but not a ton of hardware programming experience this is just a thought.