Hi everyone. While trying to update last year's cRIO with this year's image, we got the infamous "The specified IP address is unreachable. Ensure that the IP address is on the correct subnet." error.
A few notes:
- Yes, IPs are correct. The cRIO is still set to 10.5.37.2 from last year and the laptop is on a static IP of 10.5.37.6
- Yes, the subnet mask is 255.0.0.0
- Yes, I'm using this year's install of the development software that came with the KOP.
- Yes, I have installed the mandatory LabVIEW update with the 2010 version 19 image
- Yes, the firewall is off
- Yes, the cRIO has adequate power.
- I've tried both a normal and crossover cable (I know you're supposed to use a crossover.)
- Just to be safe, I've disabled the laptop's wirless network drivers, so the only enabled network connection is through the ethernet port.
- The really funny thing is that I can ping the cRIO and it replies back, but then the error message indicates that it can't find the IP.
I'm going to try on a different laptop tonight, but that's the only idea I have. Do you guys have any suggestions?