I did a quick interface base board for the Cypress FirstToutch PSOC-3 kit . This board bring out all the pins to .1in header to be compatible with the pin-out of last years Display Station. signal, +3.3V, GND
If you want a board, upload the ZIP file to
http://www.batchpcb.com/ (part of sparkfun), it will cost $22 plus shipping and handling per board. This is NOT TESTED yet, but I have order boards for the teams that I support. The ZIP file can be uploaded to any PCB shop. Lead time is typically 2-3 weeks at BatchPCB
The ZIP file contains all the Gerbers, schematic and board layout in PDF format.
If you want the Altium file, please email me: lafleur @ lafleur . us
Parts List:
9 each FCI .1 x 8 header pins , digikey 609-3257-nd (or you can get larger one and break into 8 pin block)
2 each FCI .1 x 14 header FM, digikey 609-2244-nd
tom lafleur
mentor Team 812