
14-01-2010, 21:00
|
 |
 |
ohhh MY god
AKA: Dan Hoizner
 FRC #0375 (The Robotic Plague)
Team Role: Mentor
|
|
Join Date: Jan 2005
Rookie Year: 2004
Location: Staten Island, NY
Posts: 1,432
|
|
|
Re: 2010 Accelerometer Documentation?
Quote:
Originally Posted by EricVanWyk
Wire your PWM cable such that the white signal line goes to either rate or temperature, the red power line goes to 5 Volts, and the black line goes to ground.
The signals are closest to the signal names: The ground is closest to the edge of the board.
|
Quote:
Originally Posted by altf2junkie
Thanks for the fast response.
Should have specified - we need to know which way to solder the PWM to the gyro, not the gyro to the digital board. Thanks for the additional information, though.
We have one PWM space for Rate and another for Temperature.
We figure that we won't need to use temperature, so all we need to know is which way to orient the PWM (white wire out, or black wire out?).
Regards, Team 339 Kilroy (FRC)
|
Emphasis mine. Just read the post a bit more carefully.
|