Do you have any video feed at all? IE. can you view the feed in your browser at all?
In order to view the camera in the dashboard you must connect the camera to the Crio and the rest of the kit (I think).
If you wish to simply test the camera and view a live feed you need to follow the instructions in section 2.12 in the 2010 robot controls document (
here)
In short you need to change your ip address to 192.168.0.X (x can be anything but 1 or 90, I used 99)
You then need go to 192.168.0.90 in your web browser and set up or put in the root password (default is pass)
You should then see a live feed from the camera. After this you should be able to change the cameras IP address from 192.168.0.90 to what ever your classmates IP is. i.e. The classmates IP is 10.XX.YY.5 so you would change the camera's IP to 10.XX.YY.ZZ (Make sure ZZ is not the same as the Classmate, I used 9) After you have plugged the camera into the Classmate you should then be able to view the live feed by going to 10.XX.YY.ZZ on the classmate.
Make sure you have all cables are plugged in and the camera's LEDs are green.
Hope that helps,
timytamy