Quote:
Originally Posted by RyanN
364 is having trouble with theirs. Actually, it sounds like an exact repeat of the problems your team was having.
I don't know the details, but basically the ethernet port lights are off. We've tried a few crossover cables, but none of them are working. The camera works connected to a laptop, and the port works when we connect the router to port 2, so neither the camera or the cRio seems to be broken.
I know we've updated the LabView software and the Dashboard software. The Dashboard update didn't work, so we tried it again, and got it to work.
The last thing I know of is that the cRio is not responding to the Dashboard or something anymore. Something about the Watchdog is stopping.
Anyway, don't quote me on the problems as I wasn't the one messing with it, but I wanted to add another team to the list.
|
I am the chief programmer for 364. We have tried all of the suggestions we could find on this post, but we are still having issues. All of the information that Ryan posted is pretty accurate. I tried uninstalling and reinstalling the DS update, but that still didn't solve anything. We are particularly interested in the fact that it seems that the ethernet port on the cRIO doesn't seem to communicate with the camera at all, but we can still communicate with when the camera is connected strait up to a laptop. The error messages in the diagnostics window say that we are experiencing a "44003" error, and the watchdog is cutting out. We can control motors and get feedback, so I know that the dashboard is communicating with the cRIO.