[EricH]

Originally Posted by Team 2811

I am just wondering if there is a size restriction on the maximum size for the driver station.

If you have any insight on this, please help me.

Thanks
Ian Heffron
Team 2811 Rules man

Section 8.3.10 has all the rules on the operator console.

In this case, you want <R81>, which tells you that you have a 60" by 12" inch shelf that the console has to fit on.

But wait, there's more! According to Section 6.2.10 , there is a 54" x 2" strip of loop-side Velcro tape running down the middle of that shelf. You are highly advised to have a matching hook-side strip on the bottom of your operator console. (I've seen control boards go flying before that strip of Velcro was added. Trust me, it's worth it.)