Quote:
Originally Posted by Greg McKaskle
Are you saying that you have to press and hold the button? Or that the cRIO doesn't reset via DS or other means?
As for the dip switch, I was able to look at one today, and with normal usage, all dip switches should be pressed down/in on the left side. If using a serial cable, the console out needs to be turned on.
Greg McKaskle
|
According to the way you described it, our dip switch is correct then. I am guessing that in the picture(s) in the FIRST documentation the safe mode switch is incorrectly set.
Yeah for having to reset I mean:
That when we first boot up our crio the classmate and robot cannot communicate with each other. The only way to solve the communication error is to press and hold the reset button on the crio. It's strange... Doesn't seem normal.