Quote:
Originally Posted by Greg McKaskle
Another thread uncovered a potential issue that causes the camera to boot very slowly. As a test, let the camera boot for a few minutes and see if it starts working. If so, the issue has to do with the C++ code immediately requesting an image after a failed one. If this is the issue, I'll look for the other thread.
Greg McKaskle
|
I don't think this is the problem, as we've tried using the camera after letting it boot for a good 10 minutes (idle time while looking through code). Any other ideas? It seems other teams are getting their cameras to work fine but no dice for us. if I haven't mentioned before, we get feed through the IP when it is directly connected, meaning that the problem must exist either in our code (which is apparently supposed to display the camera image automatically?) or the Driver Station, which we just updated.