Thread: Axis Camera 206 Power Connection
View Single Post
  #3   Spotlight this post!  
Unread 21-01-2010, 22:54
samir13k samir13k is offline
Registered User
AKA: Samir Shaikh
FRC #4329
Team Role: Mentor
  
Join Date: Mar 2008
Rookie Year: 2008
Location: St. Louis, MO
Posts: 281
samir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant futuresamir13k has a brilliant future
Send a message via AIM to samir13k Send a message via MSN to samir13k
Re: Axis Camera 206 Power Connection
You are supposed to use the cable that came with the camera....

I recall that last season, we recieved two power cables.

One came in the box with the camera, the other came in a seperate box alone. You do need to cut the power supply end off, and connect it through the 5volt power supply on the Power Distribution board next to the 5v LED on the board.

You shouldnt have any problems with it. make sure you check the polarity so that you have them hooked up correctly.