[GaryVoshol]

Originally Posted by JaneYoung

Eric,
I'm reading <R07-F>. Can you point out where it says, base red or base blue? I'm not arguing, I'm asking.

Jane

Originally Posted by <R07>

F. The fabric covering the BUMPERS must be solid red or solid blue in color.

Originally Posted by <R12>

The color of the BUMPERS will be used to identify the ALLIANCE to which the ROBOT has been assigned, red or blue. Therefore, each ROBOT must be able to display red BUMPERS and blue BUMPERS This may be done via either of two acceptable methods:

A. Each ROBOT may be built with two complete sets of interchangeable BUMPERS, one red and one blue. If this method is chosen, the BUMPERS must be identical except for the color of the covering fabric (see Rule <R07-F>).

B. The BUMPERS may be constructed with a fabric covering of one color (see Rule <R07-F>), and then covered with a removable fabric shroud of the opposite color when appropriate.

(emphasis mine)

So it looks like if you want bumpers in your traditional colors or patterned material, you'll have to build a separate set just for demos.