Thread: Still no camera feed
View Single Post
  #4   Spotlight this post!  
Unread 22-01-2010, 21:55
Mr. Lim Mr. Lim is offline
Registered User
AKA: Mr. Lim
no team
Team Role: Leadership
  
Join Date: Jan 2004
Rookie Year: 1998
Location: Toronto, Ontario
Posts: 1,125
Mr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond reputeMr. Lim has a reputation beyond repute
Re: Still no camera feed
We "fixed" our problem tonight after experiencing the exact same issues as the OP.

It turns out, all our prior attempts to update the cRIO image to v19 failed, and we were running and older image on the cRIO.

After reimaging the cRIO with v19, we were able to get the DriverStation to view the camera feed, and our WatchDog not fed errors disappeared. We were only able to do this after DOWNLOADING the code however. We still have not been successful in getting camera frames in debug mode. It also takes a long time for the camera feed to start after powering on the robot, and one has to be patient enough to not enable the robot while the camera feed is being established.
__________________
In life, what you give, you keep. What you fail to give, you lose forever...