Thread: Cannot deploy code
View Single Post
  #4   Spotlight this post!  
Unread 23-01-2010, 17:23
Patrick Chiang Patrick Chiang is offline
Programming
FRC #3070 (Team Pronto)
Team Role: Mentor
  
Join Date: Feb 2009
Rookie Year: 2009
Location: Seattle
Posts: 162
Patrick Chiang is a name known to allPatrick Chiang is a name known to allPatrick Chiang is a name known to allPatrick Chiang is a name known to allPatrick Chiang is a name known to allPatrick Chiang is a name known to all
Re: Cannot deploy code
Quote:
Are you connecting your programming computer via a wired network or wireless? If wired, try turning off any other network interfaces (including a wireless adapter).
Quote:
Does this occur when using a direct cable between computer and cRIO? Is it unique to the wifi setup?
Both. Our first configuration was:

Laptop IP: 10.30.70.6
Wireless Router IP: 10.30.70.4 (gateway)
Robot Wifi IP: 10.30.70.1
cRIO IP: 10.30.70.2

Setup:
Laptop-(eth)->Router-(wifi)->Robot Wifi-->cRIO

Then, we tried Laptop-(eth)->cRIO, and the same thing occurs.

We've already updated our software to the latest version and flashed the cRIO afterwards. Would this have anything to do with using a computer other than the Classmate they gave us?

Thanks for your time!

EDIT: And yes, we do disabled other network interfaces. The problem is that pinging the target works 100% of the time, but deployment does not.
Last edited by Patrick Chiang : 23-01-2010 at 17:26.
Reply With Quote