I have a couple of questions that somebody probably can answer.
I'm attempting to get the camera set up and working, but I can't find it! My network is working with the classmate and dev pc both plugged into the router, which is wireless to the adapter & cRIO.
The way I understand the docs, resetting (i.e. hold the button until blinking) on the camera should reset its IP to a default 192.168.0.90. So I plugged it directly into the PC with the orange crossover cable, and changed my pc IP address to 192.168.0.01. However, I still couldn't ping 192.168.0.90. Any ideas would be appreciated, though I'll work on this a little more when I have some time to mess around.
Second question: The docs on programming the PSoC have me baffled on this sentence (Control System Ch.2 section 11): "browse to where you saved FRC_IO.v1.hex, and select the FRC_IO.v2.hex file." I don't know what the deal is, but I couldn't find ANYTHING about these imaginary files ANYWHERE. If anyone could tell me WHAT and WHERE they are, it would be appreciated
Thanks a lot for any help! -2779.