[Gamer930]

We are having the same issue. . .

Tried with Windriver C++ Firmware image and then Simple Robot Default Code
Tried with Labview Firmware Image and then Default CRio Code
Both v19

Classmate Driver Station is updated

Left Drive Jag is plugged into PWM 1
Right Drive Jag is plugged into PWM 2

Joystick (which is a gamepad) set as Joystick 1 on Driver Station

Outputted joystick results to Driver Station User Messages using C++ and got good values

Green for Communications, Robot code, and E-stop on the Classmate driver Station

Programming Computer 10.1.71.6
Classmate Driver Station 10.1.71.5
C-Rio 10.1.71.2 (v19)

all of the lights on the digital side car are green on. The RSL light indicator goes from flashing to a more solid state when enabled

Replaced the Module for the C-Rio Tried both slot 4 (which is default) and slot 6
Replaced the Digital Side Car with a spare

Anyone have an idea?? If other people in this thread come up with a solution please post it because it seems like our problems are related. I was planning on calling NI on Monday for Troubleshooting