Thread: Trouble getting BDC-COMM to see the black Jaguar
View Single Post
  #4   Spotlight this post!  
Unread 25-01-2010, 13:16
Bryscus's Avatar
Bryscus Bryscus is offline
EE, CpE
AKA: Bryce B.
FRC #0180 (SPAM)
Team Role: Engineer
  
Join Date: Jan 2009
Rookie Year: 1999
Location: Jupiter, FL
Posts: 173
Bryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud ofBryscus has much to be proud of
Re: Trouble getting BDC-COMM to see the black Jaguar
Quote:
Originally Posted by Bochek View Post
We have the same problem, if anyone has the solution please let me know.
Ours is flashings orange slowly.
Below is the table from the BDC-MDL24 Getting Started Guide found here: http://www.luminarymicro.com/jaguar

Normal Operating Conditions
Solid -- Yellow Neutral (speed set to 0)
Fast -- Flashing Green Forward
Fast -- Flashing Red Reverse
Solid -- Green Full-speed forward
Solid -- Red Full-speed reverse

Fault Conditions
Slow -- Flashing Yellow Loss of servo or Network link
Fast -- Flashing Yellow Invalid CAN ID

What you are calling orange, I assume they call yellow. Therefore, you are just experiencing a loss of network link. This suggests that you have a connection problem. The Jags will blink as such when you are disabled (or any other time they are not receiving a signal). I hope this helps...

- Bryce
__________________
The opulence of the front office decor varies inversely with the fundamental solvency of the firm.
Reply With Quote