|
Re: Program Pnuematics
Our team is also using Labview to program.
We had trouble in programming the pneumatics in the beginning too, because we were using the compressor start.vi and Compressor stop.vi for the compressor and the solenoid vis for the solenoid actuator. we weren't able to get those vis to work properly, so we just replaced the Compressor vis and the Solenoid vis with Digital Output vis- that way we were able to set them true or false using a constant.
P.S.- we also used the Digital Input vis for the Pressure switch so the compressor turns off at ~115psi.
|