Quote:
Originally Posted by tdressel
We are trying to do this as well - video streaming. Currently, we are having problems with lag. I'll be happy to get all the settings you want off the camera but the following is how it's setup to date:
-factory rest the camera (press button for 6 seconds while placing the DC power plug in)
-add a 2nd account of FRC/FRC
-using 'default code' - interact with the camera (in C++)
-it displays to the classmate
The students had some lagging of 5-10 seconds. I think it's down to 2 or 3 seconds but in a game, that's pretty bad.
All other settings are likely to be the 'factory default' settings.
If you can point out any other settings in the camera you modified - that would be great. Also, if you did anything specific on the programming side, that woudl be great to know as well.
|
I can't talk detail about this now because i'm in the job.
But for your information, we're programming at LV, and the camera's settings that we change was: frame rate, time exposure, resolution and brightness. I can't remember the values by now, but at the night (around six hours) I'll be in the college and we can talk better about this.
PS: check your wireless network too. Maybe your band is limiting your comunication.