We have had that exact same problem! Our installer didn't work either and we had to manually install everything and we also had troubles with the AxisCamera compiling. We got that same error code.
We did what jhersh recommended in another thread, and removed the files from the demo folder. (The thread was:
http://www.chiefdelphi.com/forums/sh...t=80970&page=2) We did as they suggested and still were having the same problem. We finally started a new example based on the new 2010ImageDemo and just blew away the *.cpp files and copied our *.cpp files into the project. That allowed the program to compile with the AxisCamera code but we still aren't getting images.
To top it off, whenever we have the AxisCamera active, the robot acts extremely flaky. We don't get images, and in addition we are getting intermittent communications and both the communications and robot code lights on the dashboard flash red and green. If we move the robot, it stops and goes and stops and goes. This only happens if we call the AxisCamera code.
I've had nothing but trouble with the code since we've started. I believe this weekend I am going to change development computers completely or blow away everything I have from all years of robotics. I think there's just too much to fight if your update installer doesn't work properly and if you have Windriver from last year. (I moved our last year Windriver to another directory and have this years in the default directory, but it doesn't seem to help)
I think it is complete garbage that I have to have a brand new computer each year that's never seen Windriver, but its the only think I can think of to stop having everything we code a battle.
I hope someone helps you with your problem because it will solve ours as well, so I'll be watching this thread.