Quote:
Originally Posted by sp33chy
Yes. Once in a blue moon it lets me to the next page. But kicks me off after I click anything else.
|
Is it a brand new bridge? We had one last year that was defective last year. It would act like it was working - you'd log on, change settings, etc. - but when you rebooted it, it would go off into nowhere and need to be reset to get back into it. It seemed like the memory that it flashed the settings into was bad.
Out of expediency, we bought a new one locally. I spent about four hours over two days on the phone with Linksys Tech Support going through their scripted troubleshooting procedures before they authorized a RMA. We eventually received a replacement which we kept as a spare.
It's possible it could be a defective unit.
Try a hard reset of the unit to default settings, (If I recall correctly, it involves holding in the reset button for 30 seconds.) then follow the bench test steps exactly. Pay particular attention to changing your computer's IP settings after the bridge is set to it's 10.xx.xx.x address and rebooted. If you forget to change the computer, you'll lose communication with the bridge.
But, it doesn't sound like you are even getting that far.