Thread: Error connecting to cRIO through Windriver
View Single Post
  #1   Spotlight this post!  
Unread 31-01-2010, 05:58
SteveGarward's Avatar
SteveGarward SteveGarward is offline
Red 5, standing by...
AKA: 7 years already
FRC #0111 (WildStang), FRC #3132 (Thunder Down Under)
Team Role: Mentor
  
Join Date: Dec 2009
Rookie Year: 2010
Location: Gurnee, IL
Posts: 173
SteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud ofSteveGarward has much to be proud of
Error connecting to cRIO through Windriver
Hi

I've been trying on and off to get Workbench connected to the cRIO for debugging and console output. Each time, it fails to connect and gives an error, largely along the lines of the image on the cRIO is not the same as the image locally (or some such - sorry, I'm not in front of it right now).

So it's not a link error (symbols out of date etc.).. This is just basic connection to the cRIO. I've applied all the updates, and re-imaged the cRIO to v19 (twice, for various reasons). I've followed the instructions in the getting started guide exactly.

Does anyone else have any suggestions? This seems to work for everyone else first go.

The only thing that occurred to me tonight, while reading other posts, is that perhaps we need to have the Console Out DIP switch on the cRIO set to on. Is that the part I'm missing?
__________________
FRC Team 111 - WildStang (Mentor, Drive Coach)
FTC Team 7458 - Full Force! (Mentor, Coach)
FRC Team 3132 - Australia's FIRST FRC Team! (Holy crazy first year, Batman!)

Reply With Quote