[TimDavis]

We were able to get the camera code running under C++ with no changes from the sample. I have not tried the remote dashboard, however. I have configured our development laptop at the 10.xx.yy.5 address, installed the driver station application, and not used the Classmate driver station since initial benchtesting.

The bind: S_errno_EADDRINUSE error leads me to think you're having an initialization problem, perhaps the PCVideoServer is already streaming to the driver station IP and not to the laptop dashboard.

Are you able to download the sample application from your .6 development workstation, reboot the cRio, and then disconnect the laptop and just use the driver station instead of the remote dashboard?

Also, if you have modified the camera setup code, plase post your source code for a quick lookover.

Tim