|
Re: Camera just not showing up..
Make sure you are running the updated Dashboard. We installed the update, but the old program was still running on the Classmate.
The updated Dashboard program has a compass-dial at the right side for the Gyro. If you don't see that, you need to replace the program with the new one.
I think I read something about uninstalling the Driver Station/Dashboard before running the update, but it didn't say to do that with the update.
The camera and Gyro started working once I had put the new program in place. You can find the old one (and replace it) at C:\Program Files\FRC Dashboard
You will need to open the Dashboard project in LabView and build an .exe file to make the new program.
__________________
-= Mentor Lockport Warlocks -=- Team 1507 =-
Amateur Radio Callsign: AE2T
2015 Robot Inspector - Pittsburgh, Champs. Judge Observer - Champs
2014 Robot Inspector - Tech Valley, Fingerlakes, Buckeye, Championship
2013 Robot Inspector - Fingerlakes, Buckeye, Championship
2012 Robot Inspector - Fingerlakes, Buckeye, Championship
2012 Website Evaluator - Fingerlakes, Buckeye, Championship
2011 Robot Inspector - Fingerlakes 2011 Safety Advisor - Fingerlakes
|