|
Re: Jaguar to Motor
You may only power one motor off of one speed controller. (Jaguar)
However, if you want to power two motors off the same signal, you could use a Y-Cable from the DSC, if you are using PWM control.
-Nick
__________________
Alumnus of 1503 Spartonics
Founding Mentor of 5406 Celt-X
Mechanical Design Mentor of 3940 CyberTooth
Emceeing events since 2013 - come say hi!
Success doesn't always equate to match wins. It's about the wins off the field.
|