[yara92]

Mark
My programmer girls solve the problem:
1. The battery have 3 [v] for the Cypress IO board. They change the battery, then it works. But had some conflict.
2. They Double-check that for the correct cRIO Module labeled "NI 9201," , it was in wrong place. They change it.
3. after 4 hours we lost the volt 3 [v] instead 9 [v] from the battery. Interesting thing, but they drive the Robot.
4. If we can drive the robot low volt Cypress IO board.
I will consider if you cane send me any link about the Cypress IO board who he works and what is his job