|
Re: solenoid with compressor vi
Here's what it should look like when it's operating correctly.
The power LEDs on the left should all be on.
The Robot Status LED (RSL) is the really bright one on the other side of the power connector.
As a programmer, the RSL is the light you look at first.
off = off
blinking = disabled
long on/short off = teleop
solid = autonomous
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 31-01-2010 at 18:30.
|