|
Re: the behavior of the cRIO is no green light??
The Cypress IO board is optional.
It can be used to add switches and LED displays of your own design to the Driver Station. - Switches need two wires: signal (white) to P4_4 & ground (black) to ground. The power wire (red) is unused.
- Pots use all three wires: signal, ground, & power (note: full range of pot will be read by your code as 0 to 3.3)
It can also be added to the robot if you can think of a useful purpose for it.
Here are some links:
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 31-01-2010 at 19:14.
|