|
Re: Wiring 3.3V Sensors to 5V Analog Breakout...
Quote:
Originally Posted by TD912
Because we somehow managed to fry the KoP accelerometer, we decided to purchase another one (this time analog) from SparkFun electronics - the MMA7260Q ( http://www.sparkfun.com/commerce/pro...roducts_id=252 )
We're trying to ensure that we don't short out this one, so we read the directions and other documenation before attempting to wire it to the analog breakout. We Just noticed the analog breakout outputs 5V of current, but the sensor calls for 3.3V...
Will it with with 5V? Did we get the wrong sensor? Is there a way to lessen the voltage? |
Since you already have a working relationship with Sparkfun, one of my favorite sites, try using this regulator from them. It will more than handle your needs.
You could also use this one, but it will require a small bit of support circuitry.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|