|
Re: Ball 3 inch under
I believe, on our final machine, our roller will keep the ball from going in more than 2.75". After this we plan on having a hard stop 3" into the frame perimeter to eliminate any possibility of a ball ever going in too far.
Theoretically, if you're looking for something cheap, easy, and light-ish, you could use a piece of plywood as a hard stop. This would eliminate any questions about intrusion.
__________________
-Dustin Benedict
2005-2012 - Student & Mentor FRC 816
2012-2014 - Technical Mentor, 2014 Drive Coach FRC 341
Current - Mentor FRC 2729, FRC 708
|