Quote:
Originally Posted by Wiifi
Make sure the PC you are programming on has the right IP address. The IP addresses should look like this:
Wireless Bridge (on Robot) - 10.xx.yy.1
CRIO - 10.xx.yy.2
Router - 10.xx.yy.4
DS/ classmate - 10.xx.yy.5
Programming Laptop - 10.xx.yy.6
Where the xx.yy is your team number.
|
Exactly. If your computer is set to automatically pick an IP, you should see the cRIO in the network, but WindRiver will have issues detecting it. You need to set your computer to have a static IP of 10.30.17.x, where x is any number greater than 5.