|
Re: Secondary Regulator (monier)
Quote:
Originally Posted by jmanela
Hi -
We ran into a little bit of trouble with the secondary regulator on the robot. Currently, our pneumatics set up uses two regulators, one to create a zone at 60 psi, and another to create a zone at 30 psi. The primary regulator (60 psi zone) is working fine, but our secondary regulator (the one with the yellow ring) does not. It appears that air continues to leak out of the secondary regulator. The system will never fill up higher than what the secondary regulator is set at. This is the same set up as we have used before and it has worked before, but for some reason, it is no working at all. We have no idea why... Any suggestions?
Thanks.
|
Sound like you may have in installed backwards. Check and make sure.
__________________
"Champions are champions not because they do anything extraordinary but because they do the ordinary things better than anyone else." —Chuck Knoll
2015 Indianapolis District Winner
2014 Boilermaker Regional Industrial Design Award
2013 Smoky Mountain Regional Industrial Design Award
2012 Boilermaker Engineering Excellence Award
2010 Boilermaker Rockwell Innovation in Control Award.
2009 Buckeye J&J Gracious Professionalism Award
2009 Boilermaker J&J Gracious Professionalism Award
2008 Boilermaker J&J Gracious Professionalism Award
2007 St Louis Regional Winners
|