[alex42]

The day before yesterday, we were deploying code (not as a startup, just from Robot Main so we could do front panel debugging, and also to test the unlikely theory that loading code as a startup was causing a weird error we were having where the cRIO would switch every few seconds between working and thinking it had no code), and at the end of the process the dialog box said "deployment completed with errors" and so of course the code didn't actually run. We tried again, and were of course told the cRIO was already in use. So we rebooted the cRIO and tried again (twice), and both times it gave us "code deployed with errors". So we reimaged the cRIO, and then it worked. Yesterday evening the same problem showed up, and we fixed it in the same way. Does anyone know what might be causing this and what might work as a permanent fix? For the record, the no code error I mentioned we were also fixing temporarily through reimaging the cRIO and it wasn't manifesting itself at either time when this error showed up.