Quote:
Originally Posted by JamesCH95
I believe that rule says one controller per motor. I remember in 2005 we ran two FP motors on one victor because we got the 6V FP motors, and that was legal. I see no advantage to run two motors off of one controller other than cost savings.
The only repurcussion I can think of is that you'll only be able to utilize part of the power of two cims as your electrical power will be limited to ~420watts. Of course it will also be a whole lot easier to pop a single 40Amp breaker with 2 CIMs.
|
Are you sure? I don't remember any year where that configuration was legal.
Long story short, one controller to one motor. Thems the rules, and its the safe way do it.