|
Re: Error -52007
Make sure you truly have updated your jags. The latest firmware is 87
do you have termination resistor on both ends?
Of course make sure you are talking to the right jags.
Debug where the error is coming from. Ours generally came from setting the device into the speed/voltage mode where it waits for an ACK.
If it is still give you problems I just removed the part of the code that waits for the ACK at frist (not recommended) ,but then realized there was a newer firmware update I was unaware of and installed it and the error went away with default code.
__________________
I see in logic, Black and White
|