Thread: Camera Config Fail.
View Single Post
  #2   Spotlight this post!  
Unread 10-02-2010, 10:08
Mike Mahar Mike Mahar is offline
Registered User
FRC #0138
  
Join Date: Jan 2007
Location: Amherst, NH
Posts: 64
Mike Mahar will become famous soon enough
Re: Camera Config Fail.
Your best bet at this point is to start over. On the back of the camera is a small black button. This is the reset button. Press and hold this button down while you unplug the power for the camera. While holding the reset button, plug in the power. Keep holding the reset button for several seconds and then release.

Now, with the camera connected to your PC, navigate to the camera with our browser to 192.168.0.90. The camera should respond with a window asking you to set the root password. Set this password to "admin". The camera will then ask you to log in. Use the user name "root" and password "admin". This should get you to the main camera pages. From there, you can navigate to the page that lets you set up additional users. Add the FRC user with password FRC and you should be good to go.