Thread: Routing Camera output via the cRIO
View Single Post
  #3   Spotlight this post!  
Unread 02-10-2010, 04:16 PM
taichichuan's Avatar
taichichuan taichichuan is offline
Software Mentor
AKA: Mike Anderson
FRC #0116 (Epsilon Delta)
Team Role: Mentor
  
Join Date: Feb 2010
Rookie Year: 2010
Location: Herndon, VA
Posts: 328
taichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud of
Send a message via AIM to taichichuan
Re: Routing Camera output via the cRIO
Yes, you'll need to add a route to the Classmate to be able to get to the Axis camera as well. In WinDoze from a DOS cmd box:

route add 192.168.0.0 mask 255.255.255.0 10.xx.yy.2 metric 3 -p

The xx.yy is your team number e.g., Team 116 would be 10.1.16.2. The metric of 3 allows it to go through 3 hops to get to the camera. It's one more than you need, but this allows you to attach a secondary laptop to the Classmate via a USB Ethernet and display the output on the secondary PC. Since the Classmate appears to be having trouble keeping up with the video, this is a good option that is still within the rules.

The final "-p" makes this route persistent across reboots. I.e., you won't have to enter this route again on the Classmate.

HTH.
Reply With Quote