|
Re: Help Reading Joystick button Values
Using a Joystick Get... - Hover over the Joystick Get icon and you'll see three outputs on the right side. The bottom output is for buttons.
- Put your curser on the button output, right-click and choose Cluster, Class, & Variant Palette -> Unbundle by Name (it's the first choice)
- Place the box you get and wire it to the button output on Joystick Get
- You'll see Button 1 if you did it right. That can be switched to any other button or the box can be expanded to show multiple buttons.
- The button output can then be wired someplace else that uses the value or displays it.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 11-02-2010 at 11:33.
|