|
Re: Compressor
I had a simmilar problem, with the lights not lighting for the relays, and the Spike for the compressor not responding.
I am using labview, I tried using the WPI compressor VI's and with the compressor on Relay1 Port 4 and had no luck, I wrote my own code for the compressor and still no luck. I tried a different side car and the software exhibited the same behavior. Eventually I switched to relay 2 on the same port and now it works great.
I am not sure if we simply have a problem with relay 1 on port 4 of our cRIO, or if this is a symptom of a different problem.
Just figured I would share my experience.
-James
__________________
I'm Back
5279 (2015-Present)
3594 (2011)
3280 (2010)
1665 (2009)
1350 (2008-2009)
1493 (2007-2008)
1568 (2005-2007)
|