Thread: How to connect the 12v solenoid to the cRIO and spike relay?
View Single Post
  #3   Spotlight this post!  
Unread 12-02-2010, 20:28
EricWilliams EricWilliams is offline
Registered User
FRC #2039 (Rockford Robotics)
Team Role: Mentor
  
Join Date: Mar 2005
Rookie Year: 2001
Location: Rockford, IL
Posts: 103
EricWilliams is a glorious beacon of lightEricWilliams is a glorious beacon of lightEricWilliams is a glorious beacon of lightEricWilliams is a glorious beacon of lightEricWilliams is a glorious beacon of lightEricWilliams is a glorious beacon of light
Re: How to connect the 12v solenoid to the cRIO and spike relay?
If you are connecting it to the Solenoid Module of the cRIO, you can cut the grey two pin cables that came in the KOP in half, and use the heads from those. Solder the wires of the solenoids to those connectors, and you should be all set to plug it to the cRIO module.

Good luck!