[nick1023]

Thanks for the quick replies guys!

We are using all 12v solenoids on the bot and power to the solenoid bumper is wired according to the 12v solenoid diagram.

I did suspect the power to the solenoid breakout module bumper. We swapped the wiring and the wago connector to the breakout module bumper.

To be clear, the sputtering still happens when I have only the cRio with only the pneumatics module hooked up running the Labview solenoid example. Nothing else is hooked up to the cRio including the pneumatics bumper. The module lights that indicate what solenoids should be energized still flutter.