|
Re: 6 hours, 4 mentors and 2 students couldnt figure out whats wrong with our relays
OK, the camera was not the problem, but our code was. We now have it working!
The root cause was that we had set the relay definition as "Forward Only" in the Begin.vi. Changing it to "Both Directions" did the trick.
Here is my posting with a picture of what fixed it for us.
Edit: It looks like this is a known issue. Thanks to Joe Ross for pointing this out.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
Last edited by billbo911 : 16-02-2010 at 22:56.
|