|
Re: How do i program compressor
Quote:
Originally Posted by Dakota
How do I set that up? I tried the following with no luck.
In Begin:
Compressor open--->Compressor Start--->Compressor Refnum set
In Finish:
Compressor Refnum Get--->Compressor Stop--->Compressor Close
Is that right? How do I do it?
|
That sounds correct. My understanding is that is all it would take to make it work, that is, if you made sure to have the DIO's and channels correct, which it sounds like you did.
Also, make sure your DSC has power and the there is a circuit breaker feeding the relay and you have replaced the fuse in the spike with a 20amp circuit breaker.
If this doesn't work, which it never did for us, reply back and I'll post what we did to get it to work. BTW, search for issues with compressors. There are several threads about it and some also have solutions.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|