Thread: Is the Signal light Supposed to Blink or Be steady?
View Single Post
  #4   Spotlight this post!  
Unread 18-02-2010, 13:22
pilum40 pilum40 is offline
Steve Miller-Coach-Team 3355
AKA: Steve Miller
FRC #3355 (Bigg Redd)
Team Role: Coach
  
Join Date: Jan 2010
Rookie Year: 2010
Location: Arlington, Texas
Posts: 143
pilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud ofpilum40 has much to be proud of
Re: Is the Signal light Supposed to Blink or Be steady?
Quote:
Originally Posted by Alan Anderson View Post
Before network communication is established, the RSL should blink quickly.

When the robot is disabled, the RSL should blink slowly.

When the robot is enabled, the RSL should be on with a brief flicker off every second and a half.

(I think the RSL is on solid during autonomous mode.)

If your big amber light isn't doing exactly the same thing as the little green one on the Digital Sidecar, you probably don't have the connection between its outside pins installed properly.
Alan:
I went back and wired it correctly as per your post! Works like a champion! This forum rocks!
Thanks!