[Andy Bradley]

We are having the exact same problem. After the updates, we get the following error anywhere from 4 to 7 times a second:
ERROR <Code> -44006 occurred at DriverStationEnhanced IO.lvlib:Access Raw Cypress outputs.vi>>DriverStation.lvlib:Start Communication.vi>>Robot Main.vi

The can bus is dropping in and out, and I suspect the spamming error messages may be a contributing factor. Any luck solving this one?

ETA: The errors can be found by selecting the diagnostics tab on the driver station screen, and then clicking the "View Log File..." button. We aren't using the cypress board at all, but will try to configure/connect it to see if the errors stop.