|
Re: Crio-Sidecar
Make sure the jumpers for the 5V supply aren't in for the Jaguars. I don't know if it will make any difference, but they certainly don't need to be there, and the Jaguar's should have the 5V connection open internally. You should only use them for servos. This should make no difference, but it's worth a shot...
Make sure all the connections are tight. Disconnect everything from the side car, then reconnect all of it. Do this for the cRIO Module as well. Check the 12V supply as already suggested. Make sure the PWM Cables are in the correct way.
If none of that works, I would begin thinking about ordering a new Sidecar as it shouldn't cut out like it is.
__________________
Garnet Squadron
FRC 4901
Controls Mentor
@rnazaretian
Previous mentor and student from Team Fusion, FRC 364
|