Quote:
Originally Posted by PaulRevere
Thanks for the fast response Alen! We have our Bridge connected directly to our Power Distribution board, using the Wago connector. We’ve removed and seated the Wago connector into the Power Distribution Board, and reinserted the wires into the Wago connector. I doubt it’s a power issue, as the bridge never reboots. (Like the Power, Wireless, and Link LEDs never go out.) Though the link/act light DOES stop flashing when these communication losses occurs. (This would indicate that there was no network traffic being passed over the Bridge.)
|
Make sure you don't have any other part of the robot close to the front of the gaming adapter. If the "security" button gets pressed it will disconnect from the access point. We saw this with a number of teams last year.
-Joe