Thread: signal light
View Single Post
  #2   Spotlight this post!  
Unread 23-02-2010, 20:17
Teched3 Teched3 is offline
Hodge1
FRC #0175 (BuzzRobotics)
Team Role: Mentor
  
Join Date: Apr 2006
Rookie Year: 1996
Location: Connecticut
Posts: 319
Teched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud of
Smile Re: signal light
I believe there is a 2 wire cable in the KOP for this purpose, about 24 inches long. Check the KOP inventory and pictures. It is probably already in the software, as it indicates problems to the field personnel, but I am not certain.

It should come on when the robot is powered up. They usually blink, and at various rates from robot to robot (in the past)
__________________
Sweat the details
Why is there never enough time to do it right, but always enough time to do it again!
Even if you're on the right track, if you sit still, you'll get run over!!!
Last edited by Teched3 : 23-02-2010 at 20:22. Reason: Added information