|
Re: Digital Sidecar relay ports: correct voltage?
Do you see the Relay status lights (red/green/off) changing states while the Spike status light remains orange?
Normally, with those symptoms I'd say the Spike is not receiving a signal.
P.S. I checked my notes and I noted a 4.6v reading from a Relay output.
P.P.S. I checked the Spike documentation and it requires 3v minimum for the control signal.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 23-02-2010 at 21:37.
|