Thread: Compressor not stopping at 120psi
View Single Post
  #8   Spotlight this post!  
Unread 23-02-2010, 21:03
RKElectricalman's Avatar
RKElectricalman RKElectricalman is offline
Meezy the Mentor
AKA: Rameez
FRC #0384 (Sparky 384)
Team Role: Mentor
  
Join Date: Mar 2005
Rookie Year: 2004
Location: Richmond, Va
Posts: 88
RKElectricalman is just really niceRKElectricalman is just really niceRKElectricalman is just really niceRKElectricalman is just really nice
Send a message via AIM to RKElectricalman
Re: Compressor not stopping at 120psi
I've been measing 1.69 volts across the switch even when I change the DIO port to another one. Everything else connected to the digital sidecar works even another limit switch that's connected to the DIO. The switch itself has the black and white wires from the pwm cable hooked up to it, with the black wire going above the C and the white above the NO. We'll have to get back to the troubleshooting at competition thursday, but these are great tips thanks!

Also, do you think we should change the Digital Sidecar as mentioned earlier, even though everything else is working? We appreciate everyone's input!

-Meezy
__________________
ahhh Division Finalists!!